Varme Underfloor Heating Cable Kit

Varme Underfloor Heating Cable Kit systems come complete with:

  • Heating cable supplied
  • Fully programmable FH-01 thermostat controller with floor probe.
  • Floor primer.
  • Roller for primer.
  • Simple installation instructions.
  • Manufacturers Lifetime Warranty.

Contact us for any queries! Our experts are always to hand

Click here for a PDF of installation Instructions 


Varme Underfloor Heating Cable Kit

Our 20w per linear metre in-screed cable is designed to be installed in a concrete screed (usually 60-100mm). The system is a primary heat source and can be used under almost any floor covering.
The output is varied by the cable spacing and usually ranges from 120-150w per sqm in a new build or extension, up to 200w per sqm in a conservatory, or where an ‘off-peak’ solution is required.
This cable is also ideal for use directly below thick stone and flagstone type flooring.
In-screed cables are a low cost solution and are designed to be used where regular constant heat is required. Where irregular heating is needed (e.g. conservatory for ad-hoc use) we recommend the under-tile system with insulation boards (or an under wood/laminate carbon film system).
Price includes heating cable, digital thermostat with floor sensor and primer


  • High quality cable design
  • Low cost
  • Ideal for permanent heating of screed floors
  • Also suitable for de-icing driveways

Contact us for any questions or queries!


1.0 – 1.2m², 1.3 – 2.0m², 11.6 – 13.5m², 13.0 – 15.0m², 14.0 – 17.0m², 16.0 – 19.0m², 17.0 – 20.0m², 18.5 – 22.0m², 2.1 – 2.8m², 2.9 – 3.5m², 20.0 – 23.0m², 22.0 – 26.0m², 24.0 – 30.0m², 3.6 – 4.1m², 4.2 – 4.8m², 4.9 – 5.8m², 5.9 – 6.9m², 7.0 – 9.0m², 8.0 – 10.0m², 9.5 – 11.5m²


There are no reviews yet.

Be the first to review “Varme Underfloor Heating Cable Kit”
Scroll to Top